Latest teach pendant unit Tenders | Government teach pendant unit Tenders

Central Government/Public Sector

CTN :45218634

22 May, 2026 NA

Multi City - Delhi

Tender For auction sale of depot ferrous scrap - cond. and scrap m.s and c.i signaling released material comp. of padstal, wench machine, counter weight, wheel, interlocking lever, crank, fish plate, cable marker, nut bolt, bottom/top roller, wire adj. screw, joint, discounting link, point side, gate boom barrier, foundation,terminal,locking topper, extended bracket, main signal unit, cls unit 1 to 4 aspect arm signal, signal post, signal base, girder, lifting barriar lever,lpipe,channel, pole, pole stand angle, ground liver frame, straight arms, all type of lock, crank, and wheel, hand plunger lock, panel indication lock,epd, slideing boom gate, mlb, bell, boom solid joint, winch set, weight, pully vertical and horizontal and other miscellaneous signal items with or without n/f attachment. as is where is basis. as it is. note:- loading by purchaser.

corporations/Associations/Others

CTN :45022223

20 May, 2026 24.48 Lacs

Dehradune - Uttarakhand

Tender For procurement of consumables and various other items at chibro power station - ci foot valve2" with nipple, gun metal gate valve 3/4" dia, heavy duty, water working pressure 200 psi both side inner threaded. make-leader /l &t/ ksb, flexible rubber armoured hose pipe 2", single phase mono block pump 2.00 hp, make- crompton greaves/kirloskar, single phase starter for 2 hp pump make- l& t/crompton greaves, limit switch for tgb as per sample., safety shoes , man size ( as per required), make- allen couper/bata, dangri for man of good quality cloth, towel, make- bombay deying / raymond s, synthetic rubber hose pipe, oil proof heat resistant with nylon thread, conforming to is 7654/87 type 2,working pressure: 10 kg per sq cm, id: 20 mm, od: 32mm, length: 20 mtr, make: jyoti/indo/vardhman, ball bearing no. 6313, make: skf/nbc/fag, led indication lamp, universal type,24 volt (red+ yellow+ green), ecil make servo potentiometer continuous, wire wound type 3.5 cs, rechargeable 5w led torch 3.7v, 3000mah, brass float for tgb dia. 90 mm, h-150 mm as per sample, filler gauge 600 mm long, filler gauge 150 mm long, exhaust fan , single phase, having 300 mm dia., rpm- 1400, make: crompton greaves or equivalent, extension board suitable for 16 amp, 240 v, proximity sensor for miv open close indication, pvc insulated copper cable (sheathed) ,2 core ,size 1.5 mm ,1100 volts, as per is: 694 ,(91.44 meter. roll ), h.p. jointing sheet thickness 2 mm, width 1350 mm, h.compo/champion make, h.p. jointing sheet thickness 3 mm, width 1350 mm, h.compo/champion make, pressure gauge 0-10 kg/cm , dial size: 150 mm, panel mounting, threaded 3/8 bsp, make- baumer/ stico/wika, pressure gauge 0-21 kg/cm , dial size 150 mm, panel mounting, threaded 3/8 bsp, make-baumer/stico/wika, pressure gauge 0-40, ss shim thickness 0.05mm, width 14" bis standard, ss shim thickness 0.06mm, width 14" bis standard, ss shim thickness 0.07mm, width 14" bis standard, ss shim thickness 0.08mm, width 14" bis standard, ss shim thickness 0.10mm, width 14" bis standard, pvc flexible corrugated pipe dia., 2". bis standard, pvc flexible corrugated pipe dia., 1 ", l-30 meter bis standard, switching valve, hed 80a, make rexroth or other equivalent as per sample, solenoid coil, 220 volt d.c, 30 watt, i d-23 mm, height -50mm , make- rexroth or other equivalent as per sample, solenoid coil r901267189 220 volt dc , 42 watt, , make- rexroth or other equivalent as per sample, roller bearing no. nu 314, make skf/nbc/fag, pressure switch for type kps 39,make- danfoss or other equivalent as per sample, rain coat, stud, size: 5/8 x 125 mm long, bsf threaded 32 mm & 22 mm, material en-56c as per sample., hex head bolt size: 3/4 bsf x 114 mm long, half threaded, material en-56c as per sample., hex head bolt size: 5/8 bsf x 152.4 mm long, half threaded, material en-56c as per sample, plain washer, size: 5/8 , thickness 2 mm, id- 18 mm, od-40 mm as per sample, hex head brass bolt 1 bsf x 76 mm long with brass nut as per sample, s.s stud 5/8 bsfx 160 mm long with 2 no. hex nut & 2 no. washer as per sample, mechanical seal for pump model: t3s 80/54 nts xf s2 rnj ibalx. make- tushaco as per sample, double ended ms studs m 24- 2.5 as per sample, wire wound high pressure jointing sheet for oil line. thickness- 3 mm, width- 1350 mm. make - champion/ h. compo, wire wound high pressure jointing sheet for oil line. thickness- 4 mm, width- 1350 mm. make - champion/ h. compo, m- seal phataphat 1 kg pack, 7/8 bsf 76 mm long ss stud as per sample, 7/8 brass nut as per sample, 7/8 bsf 4 long socket head cap bolt as per sample, 7/8 spring washer as per sample, 1.1/4 bsf x 4 long hex head bolt as per sample, hex head bolt size 1 1/2 bsf x 135 long a/f=60mm , to be forged by material en24t as per sample, single phase portable welding machine, fevitite epoxy compound 180 gm pack, gland sealing segment set for 60 mw m/c made of ferobestos sheet as per sample, bearing 6310 skf/ tata make, c.i. foot valve 2 wit

Central Government/Public Sector

CTN :45054944

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no: 98091750 ferrous bazaar scrap consisting of condemned and unserviceable released relay racks, diagonatic panels, trough cabinets, panel boards, shades, battery stands, signal/notice board, racks, gi sheet fabrications/ cabs, signal/ indication boards, point machine guard/cover , digital board items , ms flats,boom jalra ,gate lamp arrangement,point machine cover,signal aspect cover,tower support and other similar items of ferrous bazaar in nature with or without original fittings attachments/corroded /damaged.note 1] electrical/nf [i.e brass,bronze,silver,stainless steel,aluminium etc] items of original attachment/seperated in the location should be returned to railways.2]cutting permitted.3]not for sale item pipes /post.

CTN :44980028

29 Apr, 2026 NA

Dimapur - Nagaland

Tender For supply of electronic toe load measuring device. : electronically operated measuring device adopted foruse in track for measuring and recording the load of elastic rail clips in service. the display unit shall be compact, rugged, shock, dust and waterproof, electrically shielded and capable of functioning reliably in the severe field conditions normally encountered in indian railway system including on electrified section. unit should contain compression type load cell for load measurement with all alphanumeric lcd type load display indicator with facility of low battery and over load indication, rechargeable ni-cd battery pack for its operation, sockets for connecting gap sensing device to activate peak hold facility and for operation with external power pack etc, integrated with suitable and reliable electronic circuitry. the unit shall also be provided with two sprit levels rigidly placed at the base plate. the load cell shall be compressive type of stainless steel conforming to relevant is specification for stainless steel for manufacture of load cell. the tong shall be suitably heat treated to withstand a repetitive load cycle of 1400 kg without any sign of deformation/breakage. the link hanger and rotation handle shall be heat treated. after heat treatment, the hardness shall be in the range of 210- 240 hb. machine should have guarantee for one year from any material manufacturing defects. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44852377

20 Apr, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of others - scrap miscellaneous item(1)main & stand by computer each processor consisting of pentium iii based on latest 600 mhz 32 bit 128 mb ram, 20gb hdd 52 cd drive (writable) 1.44 mb fdd, 104ms window compatible key board & mouse, 15" colour svga monitor with network card & tcp/ip protocol,2nos(2)communication server pentium ii based pc or latest 600 mhz 32bit 128 mb ram, 20 gb hdd, 52xcd drive (writable) 1.44mb fdd,104 ms window compatible key board & mouse, 15" colour svga monitor with network card & pcp/ip protocol.,2nos(3) man & stand by work station each consisting of pentium iii based pc or latest with minimum 128mb,ram 20 gb hdd, 52xcd drive 1.44 mb fdd & speed 600 mhz along 3nos. 19" svga fully graphic colour vdus with each machine will have it separate alphanumeric key board & mouse b67 network card & tcp/ip support multimedia kit should be available to give distinguishing alarm to tpc with network card & pcp/ip protocol,5nos(4) laser coloured data logging printer suitable for printing a3 size paper (with minimum 600x3000 dpi resolution),2nos(5)indication switching pannel to display ups alarm/status,1no(6)master clock & slove clock,3nos(7)front end driver (display),3nos(8)2x5 kva dual load sharing ups system,1no(9)server computer & fep computer,4nos(10)work station computer,4nos(11)ac modem,4nos(12)dot matrix printer,2nos(13)scada software for dual hot stand by stand by system(cd)(1-13)location-sse/rc/ddu,note-pc-17nos.,dot matrix printer-02nos,colour printer-02nos,electronic device-06nos,cloc-03nos,cd-01no,total weight of electronics items-473kg,ups-1 set, total wt-375kg(ferrous-353kg,non-ferrous-22kg)

CTN :44705992

09 Apr, 2026 13.11 Lacs

Baran - Rajasthan

Tender For purchasing spares for minimac make oil filtration machines installed in turbine governing system skid and hplp bypass hpsu skid installed in turbine area in unit 5and6 (2x660 mw) csctpp, chhabra is proposed to be procured through single source - - air release valve, modelno:-dbv-14, 1/2"bsp ,brass, nbr seat,0-7kg/cm2,230v ac, 9w, h class 230 ac coil, filter clogging indicator for cu series filter, first stage10-micron filter element with 99.8% efficiency, beta-1000, make: minimac, part no: mscufefa10, foam sensor, lbfs, low level switch, mfps-n15c, differential: ±3 mm, switching voltage max:140vac/200 vdc, switching current max:0.5a, middle level switch, mfps-n15c, differential :±3 mm, switching voltage max:140 vac/200 vdc, switching current max:0.5a, n2 filter (tmr unit), n2 flow meter (tmr unit), pre-heater, 6000-watt heater element, 415 v,3 ph, length 460mm, ms flange od 160 mm, pcd-134 mm,6 hole size 9.5 mm filter elemen for pre-heater, pressure gauge 63 mm dia, pump oil seal and o-ring (rotary gear pump) (white tone), resin for trix machine, part no: mspl-rsn100, safety level switch, mfps-n15c, model no. mfps-n15c(m), level indication, low levels, 1/2" bsp liquid sp.gr.min:0.8, temperature max: 130°c test pressure max:5kg/cm2, moc: ss304 float:ø17, connection: 1/2"bsp(m), second stage 03-micron filter element with 99.8% efficiency, beta-1000, make: minimac, part no:mscufefa03, solenoid valve with diaphragm, model no:mcv-43., 1" bsp, cf8,0.5-12 bar pressure, 24 v dc coil, solenoid valve, modelno:-dbn-14z, 1/4" bsp,brass,nbr seat,0-7kg/cm2,230v ac, 9w, h class 230 ac coil, suction strainer 149-micron filter element, make: minimac, part no: ms20-m 149, temperature gauge 63 mm dia, temperature sensor, vacuum gauge 63mm dia, vacuum pump with oil seal, o-ring, filter, nrv, vacuum switch with fitting, model no:-mg-v-00-ka10, vacuum switc

Teach Pendant Unit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector